|
ARC-1110/1120/1130/1160/1130ML/1160ML/1170 (4/8/12/16/24-port PCI-X to SATA ll RAID Adapters)
The ARC-11XX Serial ATA ll RAID host adapter is a high-performance PCI-X bus to SATA ll Disk Array host adapter. The controller can provide up to 4, 8, 12, 16 or 24 SATA ll peripheral devices on a single host adapter. When properly configured, the SATA host adapter can provide non-stop service with a high degree of fault tolerance through the use of RAID technology and advanced array management features. Intel IOP331 processor has integrated the RAID 6 engine inside. It offers Areca the advantage of reduced engineering and development costs, by having the New RAID6 function build-in and integrated part saves on component costs and internal PCI bandwidth.Intel emphasis on architectural commonality in IOPs allows Areca developers to capitalize on their existing code base.
The 4/8 port Serial ATA RAID Host adapter is low-profile PCI cards-ideal for 1U or 2U rack-mount system. It is used the same RAID kernel of its field-proven external RAID controller. |
|
|
|
ARECA PCI-X RAID Card Comparison |
Model Name |
ARC-1110 |
ARC-1120 |
ARC-1130 |
ARC-1160 |
Host Bus Type |
PCI-X 64bit/133MHz |
RAID 6 Support |
YES |
YES |
YES |
YES |
Cache Memory |
256MB |
256MB |
One SODIMM |
One SODIMM |
Driver Support |
4*SATA ll |
8*SATA ll |
12*SATA ll |
16*SATA ll |
|
|
|
|
ARECA PCI-X RAID Card Comparison |
Model Name |
ARC-1130ML |
ARC-1160ML |
ARC-1170
|
Host Bus Type |
PCI-X 64bit/133MHz |
RAID 6 Support |
YES |
YES |
YES |
Cache Memory |
One SODIMM |
One SODIMM |
One SODIMM |
Driver Support |
12*SATA ll |
16*SATA ll |
24*SATA ll |
|
|
|
|
For the products photo link: http://www.areca.com.tw/support/photo_gallery.htm |
|
|
|
Adapter Architecture |
|
|
Intel IOP331 |
|
|
PCI-X 64bit/133MHz |
|
|
256MB on-board DDR333 SDRAM with ECC protection (4/8-port) |
|
|
One SODIMM socket with default 256MB of DDR333 SDRAM with ECC protection, Upgrade to 1GB. An ECC or non-ECC SDRAM module using X8 or X16 chip organizatoin (12/16/24-port) |
|
|
Write-through or write-back cache support |
|
|
Support up to 4/8/12/16/24 SATA II drives |
|
|
Multi-adapter support for large storage requirements |
|
|
BIOS boot support for greater fault tolerance |
|
|
Battery Backup Module (BBM) ready
ARC-6120BA-T112
|
|
|
RoHS Compliant |
|
|
|
RAID Features |
|
|
RAID level 0, 1, 1E, 3, 5, 6 and JBOD |
|
|
Multiple RAID selection |
|
|
Array roaming |
|
|
Online RAID level/stripe size migration |
|
|
Online RAID capacity expansion and RAID level migration simultaneously |
|
|
Instant availability and background initialization |
|
|
Automatic drive insertion/removal detection and rebuild |
|
|
Greater than 2TB per volume set |
|
|
Support S.M.A.R.T, NCQ and OOB Staggered Spin-up capable drives |
|
|
Support spin down drivers when not in use to extend service life (MAID) |
|
|
|
Monitors/Indicators |
|
|
System status indication through HDD activity/fault connector, LCD Connector and alarm buzzer |
|
|
SMTP support email notification |
|
|
SNMP support for remote notification |
|
|
I2C Enclosure management ready |
|
|
|
RAID Management |
|
|
Field-upgradeable firmware in flash ROM |
|
|
In-Band Manager |
|
|
Hot key boot-up McBIOS RAID manager via BIOS |
|
|
Support controller's API library for customer to write its own AP |
|
|
Support Command Line Interface (CLI) |
|
|
Browser-based management utility via ArcHttp Proxy Server |
|
|
Single Admin Portal (SAP) monitor utility |
|
|
Disk Stress Test (DST) utility for production in Windows |
|
|
Out-of-Band Manager |
|
|
Firmware-embedded Browser-based RAID manager, SMTP manager, SNMP agent, and Telnet function via Ethernet port (for 12/16/24 port Adapter) |
|
|
Support controller's API library for customer to write its own AP (for 12/16/24 port Adapter) |
|
|
Push Button and LCD display panel |
|
|
|
|
Software Drivers |
|
|
Windows 7/2008/Vista/Server 2003/XP/2000 |
|
|
Redhat Linux and SuSE Linux |
|
|
FreeBSD |
|
|
Solaris 10x86 |
|
|
UnixWare 7.1.x |
|
|
Netware 6.5 |
|
|
Mac OS 10.4.x/10.5.x/10.6.x (EFI BIOS support) |
|
|
|
|
Environmental/Physical |
|
Mechanical |
|
Dimension: |
ARC-1110/1120: 64(H) x 168(L) mm |
|
ARC-1130 /1160: 98.4(H) x 214(L) mm |
|
ARC-1170: 98.4(H) x 217(L) mm |
|
SATA Interface: |
ARC-1110/1120/1130/1160/1170 (Multi-layer SATA connector) |
|
ARC-1130ML/1160ML (3/4 Internal multi-lane connector) |
|
|
|
|
|
Environmental Specifications |
|
Operating: |
Temperature:+5°c to +50°c |
|
Humidity: 15-80% |
|
non-condensing |
|
Storage Temperature: |
Temperature:-40°c to 70°c |
|
Humidity: 5-90% |
|
non-condensing |
|
|
|
|
Electrical |
|
Power Requirements: |
5.5W max. On +5V |
|
4.75W max. On 3.3 V |
|
0.72W max. On+12V |
|
|
|
|
Note: |
The stick (part number: xx-/1130D1/1160D1/1170D1-xxxx) on the card, means 256MB ECC memory is included (ready to boot), if shows xx-/1130/1160/1170-xxxx, that means memory not included. You must make a separate purchase of memory and insert into adapter, before operating adapter) |
|
|
|
|